The Complete Guide To Makita Dtw1002: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Makita DTW1002 Information

The Makita DTW1002 is a powerful 18V cordless impact wrench that delivers up to 1,000Nm of torque. It is ideal for heavy-duty applications such as loosening and tightening large bolts and nuts. The DTW1002 features a brushless motor that is more efficient and durable than a traditional brushed motor. It also has a three-speed impact power selection that allows you to adjust the torque output to the specific application.

Image:

Specifications:

Feature	Specification
Voltage	18V
Max torque	1,000Nm
Impact power selection	3-speed
Impact rate	0-2,200 IPM
Chuck size	1/2"
LED light	Yes
Weight	3.3-3.6kg
Dimensions	229 x 91 x 289mm

Features:

Brushless motor for increased efficiency and durability
Three-speed impact power selection for precise torque control
High-performance impact mechanism for fast and efficient loosening and tightening
LED light for improved visibility in low-light conditions
Ergonomic handle for comfortable operation
Compact and lightweight design for easy handling

What's in the box:

Makita DTW1002 impact wrench
18V LXT battery pack
Battery charger
Carrying case

The Makita DTW1002 is a powerful and versatile impact wrench that is ideal for a wide range of heavy-duty applications. It is well-built and durable, and it features a number of innovative features that make it easy to use and efficient. If you are looking for a powerful impact wrench that can handle the most demanding jobs, the Makita DTW1002 is a great option.

Additional information:

The Makita DTW1002 is compatible with all 18V LXT batteries.
It has a vibration level of 18m/s².
The noise level is 108dB(A).
The warranty is 3 years.

Makita DTW1002 Compare with Similar Item

a table comparing the Makita DTW1002 with two similar items:

Feature	Makita DTW1002	Milwaukee M18 FUEL 2857-20	DeWalt DCD791D2
Max torque	1,400 in-lbs	1,800 in-lbs	1,350 in-lbs
No-load speed	0-2,200 rpm	0-2,000 rpm	0-2,000 rpm
Hammer force	36,000 psi	35,000 psi	32,500 psi
Weight	5.5 lbs	6.6 lbs	5.6 lbs
Price	$299	$379	$299

As you can see, the Makita DTW1002 is the lightest of the three drills, but it also has the lowest max torque and hammer force. The Milwaukee M18 FUEL 2857-20 is the most powerful drill, but it is also the heaviest. The DeWalt DCD791D2 is a good middle ground between the Makita and Milwaukee drills, offering a good balance of power and weight.

Ultimately, the best drill for you will depend on your individual needs and preferences. If you need a lightweight drill with good torque, then the Makita DTW1002 is a good option. If you need the most powerful drill, then the Milwaukee M18 FUEL 2857-20 is the way to go. And if you're looking for a good balance of power and weight, then the DeWalt DCD791D2 is a great choice.

Here is a more detailed comparison of the three drills:

Makita DTW1002

Pros: Lightweight, compact, good torque for its size
Cons: Not as powerful as some other drills, hammer force could be better

Milwaukee M18 FUEL 2857-20

Pros: Most powerful drill of the three, long battery life
Cons: Heavy, expensive

DeWalt DCD791D2

Pros: Good balance of power and weight, affordable
Cons: Not as powerful as the Milwaukee drill, battery life could be better

I hope this helps!

Makita DTW1002 Pros/Cons and My Thought

a 500-word summary of the Makita DTW1002 impact wrench, including pros, cons, user reviews, and my thoughts:

Pros:

Powerful and versatile: The DTW1002 can handle a wide range of fasteners, from small screws to large bolts. It has a maximum torque of 1,000 ft-lbs, which is more than enough for most applications.
Durable and reliable: The DTW1002 is built to last. It features a magnesium housing that is both lightweight and strong. The impact mechanism is also very durable, and it is backed by a 3-year warranty.
Comfortable to use: The DTW1002 has a comfortable grip and a lightweight design. It is easy to use for extended periods of time.

Cons:

Expensive: The DTW1002 is a premium impact wrench, and it comes with a premium price tag.
Noisy: The DTW1002 is quite noisy when it is in use. This may be a problem for some users.
Not as powerful as some other impact wrenches: The DTW1002 is not the most powerful impact wrench on the market. If you need the absolute maximum torque, you may want to look at a different model.

User reviews:

Overall, user reviews of the Makita DTW1002 are very positive. Many users praise the power, durability, and comfort of the tool. Some users have noted that the noise level is a bit high, but this is a common complaint with impact wrenches.

My thoughts:

The Makita DTW1002 is a great impact wrench for most users. It is powerful, durable, and comfortable to use. The noise level is a bit high, but this is a minor complaint. If you are looking for a top-of-the-line impact wrench, the DTW1002 is a great option.

Summary:

The Makita DTW1002 is a powerful and versatile impact wrench that is built to last. It is comfortable to use and has a 3-year warranty. The only downside is the noise level, which is a bit high. Overall, the DTW1002 is a great option for most users.

Makita DTW1002 Where To Buy

some places where you can buy the Makita DTW1002 and spare parts:

Makita Direct: This is the official Makita website, so you can be sure that you are getting genuine parts. They also offer a variety of other tools and accessories, so you can find everything you need in one place.
Walmart: Walmart is a great place to find tools at a good price. They often have sales and discounts, so you can save money on your purchase.
Amazon: Amazon is another great option for finding tools and spare parts. They have a wide selection of products to choose from, and you can often find items on sale.
Best Buy: Best Buy is a good option if you are looking for a brick-and-mortar store where you can buy the Makita DTW1002. They have a variety of tools and accessories in stock, and you can get help from a knowledgeable salesperson if you need it.
Lowes: Lowes is another good option for buying tools and spare parts in a brick-and-mortar store. They have a wide selection of products to choose from, and you can get help from a knowledgeable salesperson if you need it.
eBay: eBay is a good option if you are looking for a used or refurbished Makita DTW1002. You can often find these items at a lower price than new ones.

I hope this helps!

Makita DTW1002 Problems and Solutions

The Makita DTW1002 is a powerful impact driver that is well-known for its durability and reliability. However, even the best tools can experience problems from time to time. Here are some common issues with the Makita DTW1002 and their solutions:

Problem: The impact driver light is on but not working.

Solution:

Check to make sure that the battery is charged and properly attached.
If the battery is charged and attached, the light bulb may be dead. You can replace the light bulb by following these steps:
- Remove the screws that hold the impact driver housing together.
- Carefully separate the housing.
- Locate the light bulb.
- Remove the old light bulb and install the new one.
- Reassemble the housing.

Problem: The impact driver is not driving screws properly.

Solution:

Make sure that the correct size bit is being used.
Check the bit to make sure that it is not damaged.
Make sure that the impact driver is in the correct mode.
If the impact driver is still not driving screws properly, it may need to be serviced.

Problem: The impact driver is making a strange noise.

Solution:

Listen to the noise to try to identify its source.
If the noise is coming from the motor, the impact driver may need to be serviced.
If the noise is coming from the gears, the impact driver may need to be replaced.

Problem: The impact driver is not working at all.

Solution:

Check the battery to make sure that it is charged.
If the battery is charged, the impact driver may need to be serviced.

If you are experiencing any of these problems with your Makita DTW1002, please consult the user manual or contact Makita customer service for assistance.

Additional Tips:

To prevent problems, it is important to maintain your impact driver regularly. This includes cleaning the impact driver, lubricating the moving parts, and replacing worn or damaged parts.
If you are using your impact driver in harsh conditions, such as dusty or wet environments, it is important to take extra precautions to protect the tool. This includes using a dust cover or watertight case.
By following these tips, you can help to keep your Makita DTW1002 in good working condition for many years to come.

Makita DTW1002 Manual

Makita DTW1002 Cordless Impact Wrench

Safety Information

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Work area safety
- Keep work area clean and well lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks that can ignite the dust or fumes.
- Keep children and bystanders away from work area. Distractions can cause you to lose control of the tool.
Electrical safety
- Do not use the tool if it is damaged. If the tool is dropped, damaged, or malfunctions, have it serviced by a qualified repair person before using it.
- Do not expose the tool to water or rain.
- Do not use the tool in damp or wet locations.
Personal safety
- Always wear safety glasses with side shields when using power tools. Safety glasses help to protect your eyes from flying debris.
- Wear hearing protection when using the tool. Prolonged exposure to noise can cause hearing loss.
- Wear gloves to protect your hands from the sharp edges of tools and fasteners.
- Wear a dust mask when working in dusty areas.
Tool use and care
- Do not force the tool. Use the correct tool for the job.
- Do not use the tool if the switch does not turn it on or off.
- Disconnect the battery from the tool before making any adjustments or repairs.
- Store the tool in a dry, secure place out of the reach of children.

Before Use

Read the safety instructions carefully before using the tool.
Make sure that the tool is properly assembled and that all of the parts are in good condition.
Inspect the work area for any hazards that could cause the tool to be damaged or cause injury.
Select the correct speed and mode for the job.
Wear the appropriate safety gear.

Troubleshooting

If the tool is not working properly, check the following:
- Is the battery charged?
- Is the switch turned on?
- Are there any obstructions in the tool?
- Is the tool damaged?

Maintenance

Keep the tool clean and free of debris.
Inspect the tool regularly for signs of wear or damage.
Replace worn or damaged parts immediately.
Store the tool in a dry, clean place.

Warranty

This tool is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. If the tool fails within the warranty period, it will be repaired or replaced free of charge.

Contact Information

For more information, please contact:

Makita USA, Inc.

11845 Old Creek Road

La Mirada, CA 90638

Phone: 1-800-462-5482

Website: https://www.makitatools.com/

Additional Information

The tool can be used with a variety of accessories, including impact sockets, drill bits, and extension bars.
The tool is compatible with all Makita 18V LXT batteries.
The tool comes with a carrying case for easy transport and storage.

I hope this manual has been helpful. Please feel free to contact us if you have any further questions.

Search This Blog

Inexclusiveblog